Advanced Control and Supervision of Mineral Processing Plants
Edited by Daniel Sbárbaro and René Villar
 |
Online price: £81.00
RRP: £90.00
You save £9.00 (10% discount) Series: Advances in Industrial Control Category: Mineralogy, Industrial Chemistry, General Material Science, General Engineering, Electronics Engineering Rating: 0 vote(s). |
Advanced Control and Supervision of Mineral Processing Plants describes the use of dynamic models of mineral processing equipment in the design of control, data reconciliation and soft-sensing schemes; through examples, it illustrates tools integrating simulation and control system design for comminuting circuits and flotation columns. Coverage is given to the design of soft sensors based on either single-point measurements or more complex measurements like images. Issues concerning data reconciliation and its employment in the creation of instrument architecture and fault diagnosis are surveyed. In consideration of the widespread use of distributed control and information management systems in mineral processing, the book describes the platforms and toolkits available for implementing such systems.
Applications of the techniques described in real plants are used to highlight their benefits; information for all of the examples, together with supporting MATLAB® code can be found at www.springer.com/978-1-84996-105-9.
Modern mineral processing plants are required to be safe and profitable and to minimize their environmental impact. The consequent quest for higher operational standards at reduced cost is leading the industry towards automation technologies as capital-effective means of attaining these objectives.
Advanced Control and Supervision of Mineral Processing Plants describes the use of dynamic models of major items of mineral processing equipment in the design of control, data reconciliation and soft-sensing schemes; through examples, it illustrates tools integrating simulation and control system design for comminuting circuits and flotation columns. Full coverage is given to the design of soft sensors based on either single-point measurements or more complex measurements like images. The chief issues concerning steady-state and dynamic data reconciliation and their employment in the creation of instrument architecture and fault diagnosis are surveyed. In consideration of the widespread use of distributed control and information management systems in mineral processing, the book describes the current platforms and toolkits available for implementing such advanced systems.
Applications of the techniques described in real mineral processing plants are used to highlight their benefits; information for all of the examples, together with supporting MATLAB® code can be found at www.springer.com/978-1-84996-105-9.
The provision of valuable tools and information on the use of modern software platforms and methods will benefit engineers working in the mineral processing industries, and control engineers and academics interested in the real industrial practicalities of new control ideas. The book will also be of interest to graduate students in chemical, metallurgical and electronic engineering looking for applications of control technology in the treatment of raw materials.
Introduction.- Sensor Systems and Measurement Processing.- Soft-sensing.- Vision-based Sensors.- Dynamic Modeling, Simulation and Control of Comminution Systems.- Dynamic Modeling and Control of Flotation Columns.- Industrial Products for Advanced Control of Mineral Processing Plants.- Appendices: Software Packages Used in Soft-sensor Model Development; Mineral Processing Toolbox for MATLAB® and Simulink®.
Customer Reviews:
Publication Details:
Binding: Mixed media product, 311 pages
ISBN: 9781849961059
Format: 235mm x 155mm
BIC Code: PNV, TDC, TGM, TGXW, TJFM
Imprint: Springer
Other visitors also viewed:
 |
|
Email to a colleague- Active Braking Control Systems Design for Vehicles
- Active Control of Flexible Structures - From Modeling to Implementation
- Adaptive Voltage Control in Power Systems - Modeling, Design and Applications
- Adaptive Voltage Control in Power Systems - Modeling, Design and Applications
- Advanced Control and Supervision of Mineral Processing Plants
- Advanced Control of Industrial Processes - Structures and Algorithms
- Advanced Control of Industrial Processes - Structures and Algorithms
- Advanced Fuzzy Logic Technologies in Industrial Applications
- Advanced Fuzzy Logic Technologies in Industrial Applications
- Applied Predictive Control
- Computational Intelligence in Time Series Forecasting - Theory and Engineering Applications
- Computational Intelligence in Time Series Forecasting - Theory and Engineering Applications
- Control and Monitoring of Chemical Batch Reactors
- Control of Fuel Cell Power Systems - Principles, Modeling, Analysis and Feedback Design
- Control of Integral Processes with Dead Time
- Control of Ships and Underwater Vehicles - Design for Underactuated and Nonlinear Marine Systems
- Control of Solar Energy Systems
- Control of Traffic Systems in Buildings
- Control of Traffic Systems in Buildings
- Deadlock Resolution in Automated Manufacturing Systems - A Novel Petri Net Approach
- Deadlock Resolution in Automated Manufacturing Systems - A Novel Petri Net Approach
- Detection and Diagnosis of Stiction in Control Loops - State of the Art and Advanced Methods
- Diagnosis of Process Nonlinearities and Valve Stiction - Data Driven Approaches
- Diagnosis of Process Nonlinearities and Valve Stiction - Data Driven Approaches
- Distributed Embedded Control Systems - Improving Dependability with Coherent Design
- Distributed Embedded Control Systems - Improving Dependability with Coherent Design
- Drives and Control for Industrial Automation
- Dry Clutch Control for Automotive Applications
- Dynamic Modelling of Gas Turbines - Identification, Simulation, Condition Monitoring and Optimal Control
- Dynamics and Control of Switched Electronic Systems - Advanced Perspectives for Modeling, Simulation and Control of Power Converters
- Extremum-Seeking Control and Applications - A Numerical Optimization-Based Approach
- Fault Detection and Fault-Tolerant Control Using Sliding Modes
- Fault-tolerant Control Systems - Design and Practical Applications
- Fault-tolerant Flight Control and Guidance Systems - Practical Methods for Small Unmanned Aerial Vehicles
- Fault-tolerant Flight Control and Guidance Systems - Practical Methods for Small Unmanned Aerial Vehicles
- Fractional-order Systems and Controls - Fundamentals and Applications
- Fuzzy Logic, Identification and Predictive Control
- Hard Disk Drive Servo Systems
- Hard Disk Drive Servo Systems
- Identification of Continuous-time Models from Sampled Data
- Identification of Continuous-time Models from Sampled Data
- Induction Motor Control Design
- Industrial Process Identification and Control Design - Step-test and Relay-experiment-based Methods
- Internet-based Control Systems - Design and Applications
- Magnetic Control of Tokamak Plasmas
- Magnetic Control of Tokamak Plasmas
- Manufacturing Systems Control Design - A Matrix-based Approach
- Manufacturing Systems Control Design - A Matrix-based Approach
- Measurement, Control, and Communication Using IEEE 1588
- Measurement, Control, and Communication Using IEEE 1588
- Model Predictive Control of Wastewater Systems
- Model Predictive Control System Design and Implementation Using MATLAB®
- Model Predictive Control System Design and Implementation Using MATLAB®
- Model-based Fault Diagnosis in Dynamic Systems Using Identification Techniques
- Model-based Process Supervision - A Bond Graph Approach
- Model-based Process Supervision - A Bond Graph Approach
- Modelling and Analysis of Hybrid Supervisory Systems - A Petri Net Approach
- Modelling and Analysis of Hybrid Supervisory Systems - A Petri Net Approach
- Modelling and Control of Mini-Flying Machines
- Modelling and Control of Mini-Flying Machines
- Modelling and Controlling Hydropower Plants
- Networked and Distributed Predictive Control - Methods and Nonlinear Process Network Applications
- Nonlinear Control of Vehicles and Robots
- Nonlinear H2/H-Infinity Constrained Feedback Control - A Practical Design Approach Using Neural Networks
- Nonlinear H2/H-Infinity Constrained Feedback Control - A Practical Design Approach Using Neural Networks
- Optimal Control of Wind Energy Systems - Towards a Global Approach
- Optimal Control of Wind Energy Systems - Towards a Global Approach
- Optimal Real-time Control of Sewer Networks
- PID Control in the Third Millennium - Lessons Learned and New Approaches
- Piezoelectric Transducers for Vibration Control and Damping
- Piezoelectric Transducers for Vibration Control and Damping
- Practical Grey-box Process Identification - Theory and Applications
- Practical Grey-box Process Identification - Theory and Applications
- Practical PID Control
- Practical PID Control
- Precision Motion Control - Design and Implementation
- Precision Motion Control - Design and Implementation
- Predictive Functional Control - Principles and Industrial Applications
- Predictive Functional Control - Principles and Industrial Applications
- Process Control - The Passive Systems Approach
- Process Control - The Passive Systems Approach
- Process Control Performance Assessment - From Theory to Implementation
- Process Control Performance Assessment - From Theory to Implementation
- Process Modelling for Control - A Unified Framework Using Standard Black-box Techniques
- Process Modelling for Control - A Unified Framework Using Standard Black-box Techniques
- Real-time Iterative Learning Control - Design and Applications
- Real-time Iterative Learning Control - Design and Applications
- Reset Control Systems
- Ship Motion Control - Course Keeping and Roll Stabilisation Using Rudder and Fins
- Ship Motion Control - Course Keeping and Roll Stabilisation Using Rudder and Fins
- Sliding-Mode Control of PEM Fuel Cells
- Soft Sensors for Monitoring and Control of Industrial Processes
- Soft Sensors for Monitoring and Control of Industrial Processes
- Stochastic Distribution Control System Design - A Convex Optimization Approach
- Structure and Synthesis of PID Controllers
- Tandem Cold Metal Rolling Mill Control - Using Practical Advanced Methods
- Unmanned Rotorcraft Systems
- Wind Turbine Control Systems - Principles, Modelling and Gain Scheduling Design
- Wind Turbine Control Systems - Principles, Modelling and Gain Scheduling Design
- Windup in Control - Its Effects and Their Prevention
- Windup in Control - Its Effects and Their Prevention
